ProForm Trainer 30464.0 Bedienungsanleitung

Serial NumberDecalModel No. PFTL70009.0Serial No.Write the serial number in the spaceabove for reference.CAUTIONRead all precautions and instruc-tions

108. Slide the Right Upright Cover (86) onto theRight Upright (85). Remove the tie from thebracket on the Right Handrail (83). If necessary,press the

1111. Firmly tighten the four 5/16" x 1" Flat HeadPatch Bolts (3) and the two 5/16" x 1" PatchBolts (4) (only one side is shown).W

1213. Hold the Right Upright Cover (86) against theconsole assembly. Align the holes in the RightUpright Cover with the holes in the Right Upright(85)

1316. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clearplastic on the treadmill decals, remov

14OPERATION AND ADJUSTMENTTHE PRE-LUBRICATED WALKING BELTYour treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Nev

15CONSOLE DIAGRAMFEATURES OF THE CONSOLEThe treadmill console offers an impressive array offeatures designed to make your workouts more effec-tive and

16HOW TO TURN ON THE POWERIMPORTANT: If the treadmill has been exposed tocold temperatures, allow it to warm to room tem-perature before turning on th

174. Change the incline of the treadmill as desired.To change the incline ofthe treadmill, press theIncline increase and de-crease buttons or one ofth

18HOW TO USE A PRESET WORKOUT1. Insert the key into the console.See HOW TO TURN ON THE POWER on page 16.2. Select a preset workout.To select a preset

19HOW TO USE AN IFIT WORKOUTTo purchase iFit cards at any time, go to www.iFit.comor call the telephone number on the front cover of thismanual. iFit

TABLE OF CONTENTSWARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

20THE INFORMATION MODEThe console features an information mode that keepstrack of the total number of hours that the treadmill hasbeen used and the to

21HOW TO FOLD AND MOVE THE TREADMILLHOW TO FOLD THE TREADMILL FOR STORAGEBefore folding the treadmill, adjust the incline to thelowest position. If yo

22TROUBLESHOOTINGMost treadmill problems can be solved by following the simple steps below. Find the symptom thatapplies, and follow the steps listed.

23Remove the three #8 x 3/4" Screws (1) and care-fully pivot the Motor Hood (62) off.Locate the Reed Switch (73) and the Magnet (47)on the left s

24PROBLEM: The walking belt is off-center or slips when walked onSOLUTION: a. If the walking belt is off-center, first remove thekey and UNPLUG THE PO

25These guidelines will help you to plan your exerciseprogram. For detailed exercise information, obtain areputable book or consult your physician. Re

26PART LIST—Model No. PFTL70009.0 R0110ATo locate the parts listed below, see the EXPLODED DRAWING near the end of this manual.Key No. Qty. Descriptio

27Key No. Qty. Description Key No. Qty. Description101 1 Console102 1 Console Frame103 1 Left Tray104 1 Right Tray105 2 Console Clamp106 1 Console Bas

8652512021213433343328323243433045303030394036363647454636444149485439605556564658596150571842102423181818181818181919202430303030284228EXPLODED DRAWI

15151515741873373737111172222282869707168626476757265162828316766637779781616EXPLODED DRAWING B—Model No. PFTL70009.0 R0110A29

31. Before beginning any exercise program, con-sult your physician. This is especially impor-tant for persons over age 35 or persons withpre-existing

90590590596968711711273589898595928891921494905942526353597988710108931487868382818180383811334413139927358430EXPLODED DRAWING C—Model No. PFTL70009.0

995311081031011210712109291041021061111112211111111001171001051051105331EXPLODED DRAWING D—Model No. PFTL70009.0 R0110A

Part No. 295984 R0110A Printed in USA © 2010 ICON IP, Inc.ORDERING REPLACEMENT PARTSTo order replacement parts, please see the front cover of this man

420. Never leave the treadmill unattended while itis running. Always remove the key, unplugthe power cord, and switch the reset/off cir-cuit breaker t

5Thank you for selecting the revolutionary PROFORM®705 TRAINER treadmill. The 705 TRAINER treadmilloffers an impressive selection of features designed

6ASSEMBLYTo hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.Assembly requires two persons. Set the treadmill in a

72. See the inset drawing. Cut the plastic tie nearthe Upright Wire (87).Attach a Wheel (96) to the Base (95) with a 3/8"x 2" Bolt (8) and a

84. Hold a Bolt Spacer (14) inside the lower end ofthe Right Upright (85). Insert a 3/8" x 4" PatchBolt (7) with a 3/8" Star Washer (11

6. Hold a Bolt Spacer (14) inside the lower end ofthe Left Upright (84). Insert a 3/8" x 4" PatchBolt (7) with a 3/8" Star Washer (11)